Ericsson LIP-8002E Guide de l'utilisateur télécharger pdf (Page 130)

LIP-8012E & LIP-8024E Gigabit Phone User Guide

iPECS LIP-8012E & 8024E Connections

1.5.2 Wiring Connectors

The LIP-8012E & LIP-8024E each have two (2) 10/100

Base-T Ethernet ports, a “LAN” port and a “PC” port.

An intelligent switch, which implements voice packet

priority, connects the two (2) ports. This permits the

LAN to be shared between the LIP Gigabit Phone and

the desktop PC or other Ethernet terminal without

significant affect on the voice or data traffic. The “LAN”

port is connected to the LAN as described above for the

single port Phones. The “PC” port is connected to a

desktop device using any standard straight through

category 5 cable.

1.5.3 Power

All LIP-8000 series phones can be powered by the

AC/DC Adapter-K- (48 VDC @0.3A) or over the LAN

cable using the POE8 or other 802.3af compliant switch.

If using the AC/DC Adapter, after connecting the Phone

to the LAN, the Adapter’s DC voltage plug is inserted

into the power-input jack in the underside of the Phone.

One end of the AC power cord is inserted into the

mating receptacle of the AC Adapter, and the other end

is inserted into the AC power outlet.

NOTE—LIP-8000 series consoles are powered through

the flat cable used to connect the console to the IP

(A)

(B)

(C)

(D)

1 2 ... 125 126 127 128 129 130 131 132 133 134 135 ... 286 287

Pas de commentaire

Ericsson LIP-8002E Guide de l'utilisateur Page 130