Ericsson LIP-8002E Guide de l'utilisateur télécharger pdf (Page 101)

LIP-8008E User Guide

7.5 Alarm/Door Bell

The system can monitor external Alarm or Door Bell

contacts:

Alarm Monitor—should the external contact activate, a

unique Alarm Ring signal and LCD display may be

received. To restart the monitor circuit, the external

contacts must be deactivated and the Alarm Ring signal

terminated.

Door Bell—a unique Door Bell Ring (single tone burst)

may be received each time the external contact is

activated. A system contact also can be assigned to act

as a Door Open contact.

NOTE—Contacts 3 & 4 are only available in the iPECS -300 & 600.

Contacts 1 is available in the iPECS -MG.

7.6 Power Fail Transfer

When AC power to the system fails, back-up operation

may be provided with back-up batteries or Power Fail

Transfer (PFT). When battery back-up is provided the

station will operate normally. When PFT is implemented,

an SLT is connected to a CO line by the system. This

SLT can be used as any normal SLT, providing service

while power is out.

7.7 System Voice Memo

The integrated Voice Mail modules incorporate several

Voice Memos to provide Station Users with general

information such as station number, date, time, and

feature status. Voice Memos can be heard over the

speaker or handset of the iPECS Phone and over the

handset for SLTs.

For the Station Status Memo, the following items are

reported:

To terminate the Alarm signal:

• Dial 565(iPECS-LIK & MG)/65(iPECS SBG-1000) (Alarm Stop

code).

To activate the Door Open contacts:

• Lift the handset,

• Dial #* (Door Open code) and contact number 1 to 4.

1 2 ... 96 97 98 99 100 101 102 103 104 105 106 ... 286 287

Pas de commentaire

Ericsson LIP-8002E Guide de l'utilisateur Page 101