Ericsson LIP-8002E Guide de l'utilisateur télécharger pdf (Page 240)

LIP-8040E Gigabit Phone User Guide

4. PLACING A CALL

4.1 Internal Calls

You can place calls to other stations in the system over

the Intercom. The call will ring, or for an ICM Voice

Announce call, a splash tone will be heard. Ring or

Voice Announce is normally determined by settings at

the called station but you may change this by dialing ‘#’

after placing the call. By changing the mode, a Voice

Announce call will ring or a ringing ICM call will allow

Voice Announce (toggle).

You can assign a Flex button for Direct Station

Selection/Busy Lamp Field (DSS/BLF). The

DSS/BLF

button allows you to call another station with the single

touch of a button. The button LED will display the other

station’s status (ON=busy, OFF=idle).

When you go off-hook, you may connect to another

station or system resource automatically. This Prime

Line Preference may be immediate or delayed allowing

you to take other actions during the delay. Otherwise,

you may press another Flex button before going off-

hook to override Prime Line Preference.

If you go off-hook and take no action, Intercom dial-tone

will time-out, and after the Howler tone is received,

your phone will be placed out-of-service in Intercom

Lock-Out; you then must hang-up to return the phone

to an idle state.

4.1.1 Using Camp-On when calling a busy station

If the called party is busy, you may activate Camp-On,

Callback or Voice Over at the station. Camp-On

allows you to wait off-hook for the called station to

answer. Callback allows you to hang-up, and when the

busy station returns to an idle state, the system will call

To place an Intercom call:

• Lift the handset,

• Dial the Intercom number of the desired station,

• When the call is answered or the Splash tone is heard, begin

speaking with the called party.

4. Placing Calls

1 2 ... 235 236 237 238 239 240 241 242 243 244 245 ... 286 287

Pas de commentaire

Ericsson LIP-8002E Guide de l'utilisateur Page 240