Ericsson LIP-8002E Guide de l'utilisateur télécharger pdf (Page 81)

LIP-8008E User Guide

If you are the Attendant or Secretary, you may activate

Intrusion. You may also use Step Call; dial the next

station by dialing just the last digit of the Intercom

number.

3.1.2 To leave a Message Wait

If the called user does not answer or is in DND mode,

you may leave a Message Wait. The called user will

receive a Message Wait indication; the MSG LED will

flash.

3.2 External Calls

3.2.1 Placing external CO/VoIP calls

External calls are placed on CO/IP lines. These ‘lines’

are accessed either using a button on the iPECS Phone

assigned as a CO/IP line or using dial codes. The

CO/IP lines are grouped for different types of calls, local,

long distance, etc. Using the CO/IP line group code,

you will be able to access any line from the group. A

Flex button on the iPECS Phone assigned as a

LOOP

button lets you access a line from a group. Dial codes

for access to CO/IP lines are:

Individual CO/IP line access

88 + Line number (01-10 for iPECS SBG-1000, 01-42

for iPECS-50 & 100, 001-200 for iPECS-300, 001-

400 for iPECS-600, or 001-600 for iPECS-1200).

To Camp-On (wait off-hook) for a busy station:

• While placing a call to a busy station, dial * and wait for an

answer.

To Callback (wait on-hook) for a busy station:

• While placing a call to a busy station, press the CALL BACK

button and hang-up.

To make a Voice Over announcement to a busy station:

• Dial #, and after the Splash tone is heard, begin speaking.

To activate Message Waiting:

• Press the CALL BACK button and hang-up.

1 2 ... 76 77 78 79 80 81 82 83 84 85 86 ... 286 287

Pas de commentaire

Ericsson LIP-8002E Guide de l'utilisateur Page 81