Ericsson LIP-8002E Guide de l'utilisateur télécharger pdf (Page 64)

LIP-8008E User Guide

1.5.3 Wall Mount

The LIP-8000 series phones can be wall mounted as

needed. The following instructions detail how to perform

a wall mount installation:

1.6 DSS(Direct Station Select) Console Installation

A DSS console can be installed with the LIP-8000E series

phone as shown in Figure. Up to 3 consoles may be daisy

chained as shown using the flat cable provided. Keep in

mind the following conditions when installing LIP-8000

DSS consoles.

1. The AC/DC adapter must be used for LIP-8048DSS.

2. Up to two (2) LIP-8012LSS and/or LIP-8012DSS can be

installed with LIP-8000E Phone.

3. The LIP-8048DSS must be separately powered.

The available DSS is as follows:

1) LIP-8012DSS

2) LIP-8012LSS

3) LIP-8048DSS

• Mark and drill two (2) 7mm holes for plastic wall anchors.

• Insert the two (2) anchors into the holes and insert and tighten

each screw leaving about 2.5 mm (1/8-inch) of the screw

exposed.

• Slide the LIP-8000 phone over the screws and assure the

phone is secure.

• NOTE—It may be necessary to remove the phone and tighten

or loosen the screws for a secure mounting.

• For the wall-mounting, sleeve of the CAT5 cable should be

moved backward to prevent it protrude.

1 2 ... 59 60 61 62 63 64 65 66 67 68 69 ... 286 287

Pas de commentaire

Ericsson LIP-8002E Guide de l'utilisateur Page 64