Ericsson RX8000 Series Guide de l'utilisateur télécharger pdf (Page 9)

RX8200 Advanced Modular Receiver

2.5 Connecting the Receiver to the Power Supply

WARNINGS

1. Do not overload wall outlets and extension cords as this

can result in a risk of fire or electric shock

2. As no mains switch is fitted to this unit, ensure the local

power supply is switched OFF before connecting the supply

cord.

3. The Receiver is not fitted with an on/off switch. Ensure that

the socket-outlet is installed near the equipment so that it is

easily accessible. Failure to isolate the equipment properly

may cause a safety hazard.

Connect the Receiver to the power supply as follows:

!Power Supply

Ensure the power supply is isolated and switched off.

!Receiver

Ensure the correct fuse type and rating has been fitted to both the equipment

and the power cable.

!Supply Cord

Connect the lead to the Receiver input connector and then to the power

supply. Switch on the power supply.

Table 2.2: Fuse Type and Rating

Power Supply Fuse Type and Rating

100 - 240 V ac IEC/EN 60127-2 Sheet 5

Bussmann S505/Littelfuse 215

2 A 250 V T HBC

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 23 24

Pas de commentaire

Ericsson RX8000 Series Guide de l'utilisateur Page 9