Ericsson RX8000 Series Guide de l'utilisateur télécharger pdf (Page 11)

RX8200 Advanced Modular Receiver

3.3.2 Edit and Save Pushbuttons

The edit and save pushbuttons are used to modify User Settings within the menu

system. The edit pushbutton backlight is illuminated when the current menu

contains a user modifiable setting. To modify a User Setting within a menu, press

the edit pushbutton and then use the up and down pushbuttons to change the

User Setting. During this edit operation, both the edit and save pushbutton

backlights will be illuminated.

If a menu contains more than one modifiable User Setting then the left and right

pushbuttons are used to select which User Setting will be edited.

When a User Setting has been modified, the save pushbutton should be pressed

to confirm and action this new User Setting.

3.3.3 Menu Structure

The range of modifiable User Settings will vary depending on which receiver model

is being used. All models have the User Settings arranged within the following

top-level menus:

• System: This menu contains User Settings for:

 IP Control ports set-up

 IP Control ports link status

 Unit Build version details

 Unit Electronic Serial Number

• Input: This menu contains User Settings for:

 Input feed lock status and bit-rate

 Primary and secondary input feed selection

 Input feed tuning parameters

 Input feed signal and quality levels

• Service (Program): This menu contains User Settings for:

 The currently selected service for decode from the incoming feed

• CA: This menu contains User Settings for:

 The currently selected services for decryption from the incoming feed

 Director 5 parameters and status

More detail on all User Settings may be found in the Reference Guide.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 23 24

Pas de commentaire

Ericsson RX8000 Series Guide de l'utilisateur Page 11