Ericsson EDACS LBI-39169 Manuel d'installation télécharger pdf (Page 86)

LBI-39171 REMOTE ACCESS

12. REMOTE ACCESS

This section describes installing and configuring an optional Hayes modem which will allow remote access to the

Network Manager.

12.1 OVERVIEW

An optional modem may be connected to the Network Manager in one of three ways:

1. Modem connected directly to the HP Workstation.

2. Modem connected to the HP

Server.

3. Modem connected into a Terminal Server on the EDACS LAN.

12.1.1 Modem-HP Workstation Serial Port Connection

ModemModem

COM1

Work

station

Serial

Port

Phone

Lines

Figure 11 - Modem to HP Workstation Installation

This is the recommended EDACS Network Configuration for remote access. Its primary advantage is that remote access

is still possible when the EDACS LAN is not operational. The maximum baud rate is limited to 19,200 bits/second by the

serial port on the HP workstation.

NOTE

Neither of the modems in this configuration is the standard server HP Support Link Modem. The HP Support Link

Modem is limited to a baud rate of 2400 bits/second.

NOTE

1 2 ... 81 82 83 84 85 86 87 88 89 90 91 ... 115 116

Pas de commentaire

Ericsson EDACS LBI-39169 Manuel d'installation Page 86