Ericsson A1228LX Manuel d'utilisateur télécharger pdf (Page 11)

Not for commercial use – Ericsson Inc.

8 Getting Started

Connecting and Removing Your Battery

Place the battery over the back of

the phone. The label on the bat-

tery should face down. Insert the

top portion of the battery into the

phone. The tab on the bottom of

the battery should be pointing

toward the bottom of the phone.

Press down until you hear a click.

The battery is now connected.

Remove the battery by pushing in

on the tab of the battery with your

thumb.

Then, lift the battery up and out of

the battery cavity.

Charging Your Battery

Your Charger

Your phone was packaged with

either a rapid or travel charger. It is

important that you fully charge

your battery before you use your

phone. Both chargers supply

power to charge your battery while

the battery is attached to your

phone. If your phone is On, it can

receive calls while using either

charger.

Note! Never attach the charger to a

phone that does not have a battery

installed.

If you have a rapid charger, plug the charger into a

standard wall electrical outlet. If you have a travel

charger, connect the appropriate AC power cord and

phone charging cord to the travel charger.

Hold the phone with the display and keypad facing

up.

Hold the small plug on the charger cord so the light-

ning bolt symbol ( ) is up.

Getting Started

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 27 28

Pas de commentaire

Ericsson A1228LX Manuel d'utilisateur Page 11