Ericsson W40 Guide de l'utilisateur télécharger pdf (Page 27)

MBR W40 – Admin’s Manual

3. Enter the MAC address to be filtered and click the 'OK' button. A MAC address list appears, upon which the

selected filtering action (allow/deny) will be performed.

Figure 27: MAC Filtering Table

 To see an overview of the WiFi settings, Security section

1. Navigate to Local Network  Wireless. The Wireless Overview screen appears. In the Wireless Overview

screen, you can find the Security Section

Figure 28: Security Section

2. Select the security type for the connection: None, Authentication Only, or Password Protected (WPA,

WPA2, WPA and WPA2 combined).

Parameter

More Info

Security Method

There are 4 security options in the W40 (WPA, WPA2, WPA and

WPA2, Authentication only)

Authentication Method

If WPA, WPA2 or WPA and WPA2 methods are chosen, use “pre-

shared key” authentication method.

Pre-Shared Key

This entry appears only if you selected this authentication method.

Enter your encryption key in the 'Pre-Shared Key' field. You can use

either an ASCII or a Hex value by selecting the value type in the

drop-down menu provided.

Note: The pre shared key is key sensitive

Encryption Algorithm

Select between Temporal Key Integrity Protocol (TKIP) and

Advanced Encryption Standard (AES) for the encryption algorithm.

Note: TKIP can be used in a mixed 802.11g/n or 802.11b/g/n modes

Group Key Update Interval

Defines the time interval in seconds for updating a group key.

 To see an overview of the WiFi settings, Transmission Properties section

1. Navigate to Local Network  Wireless. The Wireless Overview screen appears. In the Wireless Overview

screen, you can find the Transmission Properties Section

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 107 108

Pas de commentaire

Ericsson W40 Guide de l'utilisateur Page 27