Ericsson F251m Guide de l'utilisateur télécharger pdf (Page 47)

You have now installed the GPRS connection. To

connect to the GPRS network, follow steps 1 to 3:

1) Go to ‘My Computer’-> Dial-Up Networking’ and

open the previously configured connection.

2) Type the user name and password provided by

your network operator and verify that the

telephone number is *98#. Then press ‘Connect’.

3) Once you are connected, you may use your

connection as an ordinary Internet connection.

Note: if your network operator has provided you with

a Proxy Address, you should configure your Web

browser (Internet Explorer, Netscape, etc.)

accordingly.

Windows NT GPRS set-up

Warning!: your PC must have the Remote Access

Service and the TCP/IP protocol installed within the

network components. You can check this in

‘Start->Settings->Control Panel’ and double clicking

on ‘Network’. If not, these components have to be

previously added from your Windows installation disk.

46 Annex: PC data configurations

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 60 61

Pas de commentaire

Ericsson F251m Guide de l'utilisateur Page 47