Ericsson Dialog 4106 Basic Guide de l'utilisateur télécharger pdf (Page 60)

Settings

BusinessPhone – Analog Telephone60

Ringing signal

By programming, you can adjust the ringing character and ringing

volume. To change the ringing character and volume, you have to

enter the programming mode.

Programming the ringing character and volume for the

Dialog 4106 Basic

The ringing signal character can be adjusted with three different

characters, each with another three volume levels.

u Lift the handset.

Wait for the dial tone.

¥ Press.

# Press.

z Enter Digit from the table below.

Notes:

Default setting is digit 6. If you choose 0, the ringing signal

will be turned off until the next time you go off hook.

Please note also that you will not hear the ringing singing

signal during programming.

¥ Press.

The selected ringing signal is stored.

d Replace the handset to finish the procedure.

Digit (character)

Ringing character

- Repetition rate Ringing volume

11 timeSoft

2 1 time Medium

31 timeLoud

44 timesSoft

54 timesMedium

6 (default) 4 times Loud

7 10 times Soft

810 timesMedium

9 10 times Loud

0NoneOff

1 2 ... 55 56 57 58 59 60 61 62 63 64 65 ... 79 80

Pas de commentaire

Ericsson Dialog 4106 Basic Guide de l'utilisateur Page 60