Ericsson HM200c/HM201c Manuel d'utilisateur télécharger pdf (Page 12)

PipeRider® Cable Modem User's Guide HM200c/HM201c

Wall Mounting Procedure

Step 1.

The PipeRider cable modem can be mounted on the wall using two screws and the two mounting slots on the

bottom of the unit. When mounted, the orientation of the cable modem will be as shown below.

Step 2.

Use the template below to mark the screw locations.

10 cm

Step 3.

Insert and secure screws to the wall. The screws should not be secured flush to the wall. Leave a gap of

approximately 0.6 cm from the wall surface to the bottom of the screw head.

Step 4.

Slip the PipeRider slots over the screw heads and pull down until the unit is seated securely. A slight adjustment

to the screws may be necessary to provide a snug fit to the wall.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 37 38

Pas de commentaire

Ericsson HM200c/HM201c Manuel d'utilisateur Page 12