Receiver Installation and Connection
RX8200 Configuration Guide
Figure 3. Existing EMR Receiver and On Board NIC Connection – M51, M52 & M58
2.4 MANAGEMENT CONNECTION
Default IP Address - 192.168.4.4
Connect a second network cable to the management port (labelled CONTROL 2) on the RX8200 unit and connect
this cable to the clients network. The IP address for this port can be set from the front panel of the receiver. It is
through this interface that the RX8200 Browser page can be accessed for editing and configuring all receiver
management functions.
Figure 4. Management Control Port-RX8200
Alternatively, connect the management output from the RX8200 to the 2
nd
NIC on a WNE PC or Dell Server for
local configuration as outlined graphically in Figures 7 and 8 later in this document.
Commentaires sur ces manuels